I have installed Westach supplied capacitive senders to my fuel tanks and am installing a Dynon EMS. I have the Dynon capacitance voltage converters but am not sure about the wiring process with these.
The senders each have two black, one yellow and one red wire. The adapters each have one black, one red and one white wire, while EMS has a single wire designated for each tank. How is all this joined up?
I'm guessing there are instructions that come with the senders but if so, I have long since lost them. As always, any and all help from those who have already been down this path gratefully received.
Clive Whittfield
RV6 (very!) slow build
The senders each have two black, one yellow and one red wire. The adapters each have one black, one red and one white wire, while EMS has a single wire designated for each tank. How is all this joined up?
I'm guessing there are instructions that come with the senders but if so, I have long since lost them. As always, any and all help from those who have already been down this path gratefully received.
Clive Whittfield
RV6 (very!) slow build