RepmikeBrown
Well Known Member
What's the best method for bending the aluminum curve fared to the canopy sides?
I've used the wood block and 1/2" bar method in the book. After putting the slight bend to fit the canopy the compound bend around the side now isn't fitting. Experience from those who've been down this ride would greatly be appreciated. Already looks like I'm going to have to order another piece of aluminum. It's been so true when I was told "you build two airplanes and throw one away"
Mike
I've used the wood block and 1/2" bar method in the book. After putting the slight bend to fit the canopy the compound bend around the side now isn't fitting. Experience from those who've been down this ride would greatly be appreciated. Already looks like I'm going to have to order another piece of aluminum. It's been so true when I was told "you build two airplanes and throw one away"
Mike