Hi,
I have asked this question to G3Xpert, but no reply as yet.
There are 2 CanBus connections for the Garmin GDU460 either in connector P4X01 or connector P4X02. I have twin G3X GDU's (my Left PFD) and my GDU460 (Right). My GSU is attached to the rear of GDU460 PFD Left.
According to page 26-4 of the G3X installation manual I should check with Garmin to confirm which connection is correct for my setup. Page attached to this email.
For the GDU460 (Left PFD) which connector should I connect my CanBus Connector P4X01 Pin 1 and 2 OR CanBus Connector P4X02 Pin 45 and 46.
and same question for the GDU460 (Right).
My CanBus route is:
GSA28 - GMU11 - GEA24 - GAD27 - GSU25 - GDU460 (Left) - GMC507 - GMA245 - G5 - GDU460 (Right) - GSA28
----------------------------------------------------------------
Extract from Manual:
26.4 GDU 4XX (Display Unit)
26.4.1 P4501/4601/4701 (P4X01) Connector
The P4501/4601/4701 connector (referred to as P4X01 connector in this section) can be used for connections to the GSU 25 when mounting the GSU25 to the back of the GDU 4XX (Figure 8-2).This mounting method may not be recommended for all installations, contact Garmin for details before using this method.
--------------------------------------------------------------------
Regards John
I have asked this question to G3Xpert, but no reply as yet.
There are 2 CanBus connections for the Garmin GDU460 either in connector P4X01 or connector P4X02. I have twin G3X GDU's (my Left PFD) and my GDU460 (Right). My GSU is attached to the rear of GDU460 PFD Left.
According to page 26-4 of the G3X installation manual I should check with Garmin to confirm which connection is correct for my setup. Page attached to this email.
For the GDU460 (Left PFD) which connector should I connect my CanBus Connector P4X01 Pin 1 and 2 OR CanBus Connector P4X02 Pin 45 and 46.
and same question for the GDU460 (Right).
My CanBus route is:
GSA28 - GMU11 - GEA24 - GAD27 - GSU25 - GDU460 (Left) - GMC507 - GMA245 - G5 - GDU460 (Right) - GSA28
----------------------------------------------------------------
Extract from Manual:
26.4 GDU 4XX (Display Unit)
26.4.1 P4501/4601/4701 (P4X01) Connector
The P4501/4601/4701 connector (referred to as P4X01 connector in this section) can be used for connections to the GSU 25 when mounting the GSU25 to the back of the GDU 4XX (Figure 8-2).This mounting method may not be recommended for all installations, contact Garmin for details before using this method.
--------------------------------------------------------------------
Regards John