BillL
Well Known Member
So, may have now mounted the Baja Designs LED for tip lights. We know they are bright and electrically quiet, but what have you learned about . .
. . . the mounting system? Is it better to be recessed (Mike Bullock), flush or mostly even?? Does flare off the lens occur if not recessed?
. . . adjustment (and aiming) with the three spring method. Do the vertical loads of bouncing taxi or aero cause them to droop? Did you go with heavy springs for this reason?
. . . attachment for mount - Mike B used the face, others (pict below) use the standard points, but depend on the fasteners to keep it in position.
So - what would you recommend from your installation and findings?
Thanks!!
. . . the mounting system? Is it better to be recessed (Mike Bullock), flush or mostly even?? Does flare off the lens occur if not recessed?
. . . adjustment (and aiming) with the three spring method. Do the vertical loads of bouncing taxi or aero cause them to droop? Did you go with heavy springs for this reason?
. . . attachment for mount - Mike B used the face, others (pict below) use the standard points, but depend on the fasteners to keep it in position.
So - what would you recommend from your installation and findings?
Thanks!!