hlangebro
Well Known Member
I realize this have been brought up many times here on the forums, but I still havent found my smoking gun for my bad Glideslope reception. Everything is routed as per instructions. My ground is alu tape on the tip and on the wing, though nutplates. LOC works fine, but of course it is a different frequency.
First thing that comes to mind is if the alu tape provides enough ground? I could put in copper or add a separate ground strap....?
I also have strobes and HD led landing lights. Can there be an EMI issue?
All of you who had this problem, how did you solve it?
If the coax was bad, then I wouldnt have LOC and VOR reception either right?
It is not that I dont have glideslope reception, but I only get it very close to the airports, and I have tried a few airports and the result is the same. It is about 1-2 miles out at the most...
First thing that comes to mind is if the alu tape provides enough ground? I could put in copper or add a separate ground strap....?
I also have strobes and HD led landing lights. Can there be an EMI issue?
All of you who had this problem, how did you solve it?
If the coax was bad, then I wouldnt have LOC and VOR reception either right?
It is not that I dont have glideslope reception, but I only get it very close to the airports, and I have tried a few airports and the result is the same. It is about 1-2 miles out at the most...