kens_cockpit
Well Known Member
I have a Garmin stack with the 340 Audio Panel, 430 GPS/Comm, 300XL GPS/Comm. I have the trays for these instruments installed. I'm about to run the wires and connections for the antennas. The connectors to the antenna wires in the back of the radio trays are not screwed in tightly. They wiggle. I had the wiring loom and radio trays made by Pacific Coast Avionics. I'm not sure whether the connectors should be firm or loose. Can I/should I tighten these connectors or is there a reason they are left a bit loose?
Thanks for your thoughts.
Ken Stanton
RV8QB
Thanks for your thoughts.
Ken Stanton
RV8QB