Ok, I have both of the fuel quantity senders and both of the access plates out and cleaned up. Luckily, they were last installed with just the cork and rubber gaskets so they came out easy and were easy to clean up. I plan to follow everyone's advice and reinstall with no gaskets, just proseal. I'm also going to replace the phillips head screws with socket head cap screws. Now for the question.....should you use washers under the cap screw heads?
I've also ordered the Van's fuel pickup tubes to replace the slotted ones originally installed. A ground wire will also be installed from the sender to the airframe.
I've also ordered the Van's fuel pickup tubes to replace the slotted ones originally installed. A ground wire will also be installed from the sender to the airframe.