broken1234
Active Member
I'm looking for a creative solution to the problem with adding air to the tires on an RV-10...
Has anybody come up with the magic tool to easily access the valve stems through a reasonably small (1") hole? I see odd tire tools in A/C Spruce and Snap-On catalogs that may be useful...
A curved, rigid valve stem on the main gear would also make this an easier task. Is there a tube out there that would include this on a 15 X 6.0-6 tire?
An alternative would be a camlock-attached access panel giving you a larger hole to work through, but I hate to have to do that at this point (after paint)
Thanks!
Brad
Has anybody come up with the magic tool to easily access the valve stems through a reasonably small (1") hole? I see odd tire tools in A/C Spruce and Snap-On catalogs that may be useful...
A curved, rigid valve stem on the main gear would also make this an easier task. Is there a tube out there that would include this on a 15 X 6.0-6 tire?
An alternative would be a camlock-attached access panel giving you a larger hole to work through, but I hate to have to do that at this point (after paint)
Thanks!
Brad