chris mitchell
Well Known Member
Just received my panel, cut by Bill Morrelli at UpNorth Aviation. Worked with Bill on the layout, which went through a few iterations, then when finalised cut by laser. The finish is great and everything is nicely lined up and positioned.
Unfortunately I've changed my electrical layout since so I have some redundant switch and breaker holes. However, I plan to cover the panel to get that carbon look - I think the stuff is Dragon Plate - so I will just not drill through the extra holes.
Great service all round for those of us who don't want to spend all that time with hole cutters, drills, files and the rest.
Back to teh fuselage - skins about to go on.
Chris
Unfortunately I've changed my electrical layout since so I have some redundant switch and breaker holes. However, I plan to cover the panel to get that carbon look - I think the stuff is Dragon Plate - so I will just not drill through the extra holes.
Great service all round for those of us who don't want to spend all that time with hole cutters, drills, files and the rest.
Back to teh fuselage - skins about to go on.
Chris