rjcthree
Well Known Member
Obscure question, maybe. If I slide an sl30 into an sl40 tray and power it up, should at least the comm side come alive?
Mine does not. The sl30 nav side requires power and ground of its own on its own connector, but the comm side is pin for pin common with the sl40.
While I should probably build a bench harness, I'm trying not to....
Thanks in advance, Rick.
Ps: Law of unintended consequences: think about the potential for changes through when building your panel. What seems obviously serviceable as you mount and wire on the bench is NO FUN once it's in the panel. In my case, the tray will not slide out the front because the rear tray connector header screws are wider than the tray by a solid 1/8". Big sigh....
Mine does not. The sl30 nav side requires power and ground of its own on its own connector, but the comm side is pin for pin common with the sl40.
While I should probably build a bench harness, I'm trying not to....
Thanks in advance, Rick.
Ps: Law of unintended consequences: think about the potential for changes through when building your panel. What seems obviously serviceable as you mount and wire on the bench is NO FUN once it's in the panel. In my case, the tray will not slide out the front because the rear tray connector header screws are wider than the tray by a solid 1/8". Big sigh....