The inboard and outboard aileron attach points to the wing, an AN bolt and on other end the an365-1032 nut. Is this safe???? vibration or movement, will the nut not come loose???? anyone took some other kind of precaution that i need to be aware of???? ofcourse i will use the red past marker to make sure that i know if the nut is coming loose, but in flight???? scary.
Also the attach point of aileron to the w818 push/pull rode, is that not a very tight place for the AN nut??? i had to hold the nut with the wrench through the access hole and then tighten the bolt (instead of the nut as i usually do). anyone else had such problems??? or did i just screw up somewhere??
Thanks
Omar
Also the attach point of aileron to the w818 push/pull rode, is that not a very tight place for the AN nut??? i had to hold the nut with the wrench through the access hole and then tighten the bolt (instead of the nut as i usually do). anyone else had such problems??? or did i just screw up somewhere??
Thanks
Omar