Could someone give me Dan's e-mail address!!!! I would like to talk to him about running Light Speed and a mag on IO360, Happy New Year to all
John RV8 38GC / RV12 337JG
I run a Plasma III and a mag on an IO-320. There shouldn't be any difference there as far as the ignition is concerned. My last plane had a II, but same arrangement. PM me if you want to talk.
Bill
Where have you timed the mag. I believe both these engines in stock form fire 25deg. btc. My engine is from a Mooney that only had one dual mag. I have had a Bendix mag modified to attach properly. John
Time the mag as if you had no electronic ignition. That was 25 BTDC on my first plane (normal compression); 20 BTDC on my current plane (high compression). There should be a data sheet for the engine that tells the correct setting.
In practice, most planes with a dual setup show little or no mag drop at runup when turning off the mag.
Could someone give me Dan's e-mail address!!!! I would like to talk to him about running Light Speed and a mag on IO360, Happy New Year to all
John RV8 38GC / RV12 337JG