I am wiring my plane and got to the fabrication of the switches for the seat heaters yesterday and then got a bit flummoxed.
The seats and heaters came from Classic Aero Designs. The wiring diagram is attached and the wiring for each part of the seat (back and bottom) is just two 14 AWG wires (red and black) with a quick connect plug. No harness came with the kit.
The flummoxed part is likely my inability to read this diagram completely. The battery, the one switch and the seats, I get (except the wire colors noted on the diagram don't match the seats, except for the ground (black)). But, what's the apparent 'other' switch in the upper right of the diagram?
Searches for ACC1009 came up short and I have a call into Classic Aero.
The seats and heaters came from Classic Aero Designs. The wiring diagram is attached and the wiring for each part of the seat (back and bottom) is just two 14 AWG wires (red and black) with a quick connect plug. No harness came with the kit.
The flummoxed part is likely my inability to read this diagram completely. The battery, the one switch and the seats, I get (except the wire colors noted on the diagram don't match the seats, except for the ground (black)). But, what's the apparent 'other' switch in the upper right of the diagram?
Searches for ACC1009 came up short and I have a call into Classic Aero.