rvanstory
Well Known Member
Really struggling with making a decision regarding the control cable pass throughs the firewall. I followed the plans earlier and have three 5/8" holes for the cables. But, plans also call for standard plastic grommets. I prefer more fire protection than that.
Many of the posts are using the Doubletree firewall passthroughs. http://www.doubleteeproducts.com/ But the dimensions don't work with the existing holes.
Looking at this unit from ACS as I can cut out the holes and position them where I want.
https://www.aircraftspruce.com/catalog/appages/sptfirwallkit.php
Looking for advice from someone that used the Van's holes (5/8") to start and achieved better fire protection than standard plastic grommets.
Many of the posts are using the Doubletree firewall passthroughs. http://www.doubleteeproducts.com/ But the dimensions don't work with the existing holes.
Looking at this unit from ACS as I can cut out the holes and position them where I want.
https://www.aircraftspruce.com/catalog/appages/sptfirwallkit.php
Looking for advice from someone that used the Van's holes (5/8") to start and achieved better fire protection than standard plastic grommets.