clevtool
Well Known Member
Van's is in the process of changing the plans 09-10, but currently it says to notch a yoke to fit E-00907. This has resulted in several calls to us to buy this yoke already notched. However if you bought or plan to buy our standard kit/standard 3" yoke it will work fine without a notch. The yoke shown in the Van's plans is a 'heavy duty' yoke designed to set up to 3/16" rivets. These yokes can be identified by measuring the thickness of the 'base' where the set holder actuates through. The base of 1" is standard, the 1-1/4" is 'heavy duty'. See the illustration below for how the two yokes interact with the E-00901.
Last edited: