Good Morning,
We released G3X (non-touch) Version 12.60 to the software download area today. Please note from the list at the bottom that many system LRU's have new software. After updating the software in the PFD1 with the SD card, the display will reset, and at that time it is best to hold down on the #1 softkey while it boots up in Configuration mode. Go to the System Information page on the PFD1 and watch all devices completing the software update before taking the PFD1 out of configuration mode, and verifying proper operation for the updated system.
There are a number of improvements included in this update, as well some behind the scenes improvements to improve system function and reliability.
Please let us know if you have any questions!
Thanks,
Justin
We released G3X (non-touch) Version 12.60 to the software download area today. Please note from the list at the bottom that many system LRU's have new software. After updating the software in the PFD1 with the SD card, the display will reset, and at that time it is best to hold down on the #1 softkey while it boots up in Configuration mode. Go to the System Information page on the PFD1 and watch all devices completing the software update before taking the PFD1 out of configuration mode, and verifying proper operation for the updated system.
There are a number of improvements included in this update, as well some behind the scenes improvements to improve system function and reliability.
- New RS-232 Formats - Aviation Out is now available to be selected in the Serial data configuration menu. Aviation Out is Primarily used to provide GPS data to ELT units.
- ESP Audible Alerting - When Envelope protection becomes active, due to an ESP threshold being crossed, a spoken audible alert will be issued.
- ESP Disarm via AP Disconnect - When Envelope protection is active, pressing the AP disconnect button acted to remove torque from the servos. Now pressing and holding the AP Disconnect button for 5 seconds, will also disarm ESP. A CAS message will be displayed to indicated the inhibited state.
- Added voice audio alerts for ESP pitch and roll protection activity
- Added support for Aviation Out RS-232 format
- Added support for data log event marker via discrete input
- Improved PFD wind display when calculated wind speed is small
- Improved flight director altitude capture
- Improved flight director HDG mode
- Improved processing of MapMX RS-232 data
- Improved best airport selection
- Improved data logging
- General improvements to system operation
- Includes update to G5 software version 8.44
- Includes update to GI 260 software version 2.90
- Includes update to GMC 507 software version 5.00
- Includes update to GSA 28 software version 5.70
- Includes G5 boot block software version 2.40
- Includes GEA 24B software version 2.10
- Includes GAD 13 software version 2.10
- Includes GAD 29 software version 3.40
- Includes GAD 29C/D software version 2.10
- Includes GDL 39 software version 4.91
- Includes GEA 24 software version 3.90
- Includes GMU 11 software version 2.20
- Includes GMU 11 boot block software version 2.10
- Includes GPS 20A software version 2.40
- Includes GPS 20A GPS software version 2.10
- Includes GSU 25 software version 4.40
- Includes GSU 25 boot block software version 2.30
- Includes GSU 25C/D software version 2.90
- Includes GSU 25C/D boot block software version 2.10
Please let us know if you have any questions!
Thanks,
Justin