Weasel
Well Known Member
Previously I made a seatbelt bracket out of foam and then covered it with fiberglass. Took a long time to smooth and make nice (~6-8hrs of labor).
Used the same dimensions and printed one for another RV-10. Took about 30 min to draw on Solidworks and then about 4 hrs to print but I just walked off and picked up the finished part later in the day. Much easier.
You can make one from here
Used the same dimensions and printed one for another RV-10. Took about 30 min to draw on Solidworks and then about 4 hrs to print but I just walked off and picked up the finished part later in the day. Much easier.
You can make one from here