Turtle Deck

Hi together,

Today I prepared everything for riveting the rear upper skin on my -8.
I found that the control cables for the rudder rubbing on the lower longeron at the rear section of the fuselage. I've checked the manual but found nothing .

Is it okay to install a simple edge guard on the longeron? Iam looking for a simple solution.

Second question. Is there a proposed rivet sequence? I would start with all bulkheads an go then to the longerons.

Thanks to all

Here you go..

Had the same problem. Here is how I solved it: http://www.vansairforce.com/community/showthread.php?t=93298