VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > Reviews
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-26-2017, 08:16 PM
wjb's Avatar
wjb wjb is offline
 
Join Date: Nov 2012
Location: Half Moon Bay, CA
Posts: 676
Default PIREP: Up North Aviation (CNC panel cutting)

I'd like to give a very positive PIREP for VAF advertiser Up North Aviation and their CNC panel cutting service.

After carefully laying out my panel using Van's .dxf drawing, I found that 0.82 inches went missing off the bottom of the "real" panel (http://www.vansairforce.com/communit...d.php?t=151101). The brain trust informed me that Van's drawing is unbent; the L bend in the bottom is not indicated in the drawing.

Poop. Gotta cut an extended panel to get the space back.

Rather than trying to do it all myself, I contacted Bill M. at Up North Aviation to see if he could cut both the panel profile as well as the instrument holes on a piece of aluminum from ACS; I'd somehow add an L-angle to the bottom myself.

Bill sez, "it's a lot easier than that. Just have Vans ship me an 'oversized blank' (oversized rectangle with just the bend) and I can cut the rest - all the OEM holes and edges, plus your layout." He even provides .dxf's of "extended panels" for your layout convenience.

I ordered, and Van's sent the panel; I sent Bill a .dxf of my desired layout. After a quick iteration or two, he had the panel cut and back in my hands in just a few days; quite a bit faster than I would have expected. It came out perfectly; worth every penny.

Bill was a joy to work with. If you're looking for a pro to cut the panel just right, check out Up North Aviation, www.upnorthaviation.com

(my panel photos coming to DR's gallery soon!)
__________________
Bill Bencze
N430WB (reserved) RV-7 #74152, tip-up. Avionics and FF underway!
Log at: http://rv7.wbencze.com
Defeating gravity one rivet at a time
VAF 2017 donation happily made

Last edited by wjb : 11-26-2017 at 08:57 PM. Reason: spelling
Reply With Quote
  #2  
Old 11-26-2017, 08:25 PM
Piloto506 Piloto506 is offline
 
Join Date: Oct 2016
Location: Los Angeles, CA
Posts: 14
Default AGREE

Could not agree with you more on this one... we are still finishing up our panel but Bill helped us cut (3) versions of it very quickly due to last minute changes we decided to make. Easy to work with, right price, timely delivery, and perfect cuts every time!

Will work with Bill again!
__________________
N428SX RV-4 @ CPM

2017 Donation made
Reply With Quote
  #3  
Old 11-26-2017, 09:11 PM
johnbright's Avatar
johnbright johnbright is offline
 
Join Date: Aug 2010
Location: Newport News, Va
Posts: 133
Default

Great info... thanks!
__________________
John Bright, RV-6A 25088, at FWF
O-360, 8.5:1, vert sump, SDSEFI EM-5
Dual alt, single batt. Wiring and IP CAD files here
Newport News, Va
Reply With Quote
  #4  
Old 11-27-2017, 08:00 AM
bret's Avatar
bret bret is offline
 
Join Date: Feb 2010
Location: Gardnerville Nv.
Posts: 2,685
Default

Very easy to work with, told him what I wanted, he emailed me a drawing, I approved, then I ordered material to be drop shipped to him and wham O all done perfect!
__________________
7A Slider, EFII Angle 360, CS, SJ.
2017 gladly supported
Reply With Quote
  #5  
Old 11-27-2017, 06:57 PM
roadrunner20's Avatar
roadrunner20 roadrunner20 is offline
 
Join Date: Feb 2005
Location: Bay Pines, FL (based @ KCLW)
Posts: 1,776
Default

Here's another pirep started yesterday for Bill @ UpNorth Aviation
http://www.vansairforce.com/communit...d.php?t=155541
__________________
Dan "RoadRunner" Landry
Morphed RV7, N20DL, PNP Pilot
1040+ hours, hit 1000 enroute to Oshkosh
2017 Donation Paid
Reply With Quote
  #6  
Old 11-27-2017, 07:11 PM
smoothy58 smoothy58 is offline
 
Join Date: Feb 2008
Location: East Central Florida
Posts: 61
Default

+1 for Bill and Up North Aviation.

I only had to have him cut two versions of my panel when I changed my mind on panel configurations. 😉

Great person to work with and he does outstanding work!

Gerry Peterson
Merritt Island, Florida
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:46 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.