The tangs are not welded along the longerons, so this may be normal, but without seeing your parts it is hard to be sure. It may just be a crack in the powder coat after the end of the weld. Can you post a pic?Just about to install the WD-603 to the Firewall and noticed a small 1/8” crack in the partial weld of the Longeron tang. Anyone else had this
The tangs are not welded along the longerons, so this may be normal, but without seeing your parts it is hard to be sure. It may just be a crack in the powder coat after the end of the weld. Can you post a pic?
Ah, I see where you guys are coming from now, deep breath, thank you , appreciate your responsesIf you wiggle it a little, you’ll see that the “crack” runs the length of the part. It’s normal. You’ll understand why it’s there as you fit the longeron. Enjoy the process!