You might consider contacting Rob or Jonathon at Advanced Flight. They're very knowledgable about RV's. Another avenue might be the Advanced Flight forums, or maybe the Dynon Forums.I'm new to the forum, and am wiring my RV14A. I have full IFR avionics through Advanced Flight Systems. I haven't been able find detailed guidance on routing and securing the bundles through the console. I see there's a "Forward Tunnel Cover"
Thanks It’s a little more clear as I review sections 55 & 59. I’ll be working with AFS soon as they build my panel.You might consider contacting Rob or Jonathon at Advanced Flight. They're very knowledgable about RV's. Another avenue might be the Advanced Flight forums, or maybe the Dynon Forums.
Larry take a piece of safety wire and fish it thru the canopy rails tape on your wires and pull it thru with thatThanks for tips! I should be getting the full package from Advanced next month. By the way, anyone else frustrated that there was no warning that the canopy latch wiring had to go through that tiny gap under the canopy side? I hope I can pull the wire with fishing line!