Selling my complete RV-10 toolkit as purchased from Cleaveland except doesn't include the clekos and pliers (they went with the sale of my kit), (1) #30 drill bit and (2) #40 drill bits that were consumed during construction, 6" 3M wheel, and ScotchBrite pads. Includes pneumatic squeezer and DRDT-2 dimpler. For complete list of tools (except what is noted above as not included), see https://cleavelandtool.com/collections/rv10-kit
I am including the following as additional items: Skil low RPM driver for deburring; hand squeezer; Marson 39000 hand riveter; 4" thin-nose pneumatic yoke ($180 value); 2.5" flange-nose pneumatic yoke ($170 value); custom-built carpeted material support table for DRDT-2 dimple tool; speed debur and countersink set w/add'l 3M wheels ($100 value); additional bucking bar; 3 add'l countersink cages new in packaging, additional 10' lightweight air hose. $3,200. DRDT-2 and its table will be local pickup only in Marysville, WA. The rest of the toolkit can be shipped at buyer's expense.
I am including the following as additional items: Skil low RPM driver for deburring; hand squeezer; Marson 39000 hand riveter; 4" thin-nose pneumatic yoke ($180 value); 2.5" flange-nose pneumatic yoke ($170 value); custom-built carpeted material support table for DRDT-2 dimple tool; speed debur and countersink set w/add'l 3M wheels ($100 value); additional bucking bar; 3 add'l countersink cages new in packaging, additional 10' lightweight air hose. $3,200. DRDT-2 and its table will be local pickup only in Marysville, WA. The rest of the toolkit can be shipped at buyer's expense.
