I don't see if it's slider or tipper.Thanks for the reply. I have one main wheel fairing and don’t have the nose wheel fairing at all.
How long did you wait for the back ordered parts?
Thanks for the reply. I have one main wheel fairing and don’t have the nose wheel fairing at all.
How long did you wait for the back ordered parts?
I don't see if it's slider or tipper.
The canopy weldment and roll bar fitting take some time. I ordered mine bare. I fit them then had them powder coated the color I wanted.
Fitting the engine mount and locating all the firewall holes is another option.
Installing all the stuff behind the panel while the top skin is off
Fit the top skin and sub panels
Just some ideas.
Larry I’m building a slider. We are basically building the same plane.
On back order are the spacers for the roll bar and the roller attachments for the main weldement. Pretty much steps one and two.