Vans Tach Gen

I just got a Tacho Gen from a friend with no wiring diagram, could some one please scan and send me a copy of the wiring diagram. i tried searching on the net with no success.

Thanks

Norman
South Africa
norshel"at"mweb.co.za

I have a copy of the diagram. If you'll pm or email me your email address I'll send it to you. Basically there are three wires to the unit. Assuming you're hooking it up to a Vans tach, the red goes to the terminal marked "I" on the instrument, the black wire goes to the ground ("G") terminal on the instrument and the white wire goes to the post marked "S" for signal on the instrument.