I've taken a tremendous amount of value and help from reading these forum topics, today I decided it was time to give back.
I started down the Van's RV-10 build (shop setup, tools, and practice kits so far) and I'm about to order my empennage. While I was doing the Van's practice kits I was searching for 3D printed jigs and I could not find any. So I decided to make my own for the trailing edge drill guide and the trailing edge wedge countersink. Here it is for the taking, enjoy and I hope it helps someone like it has helped me.
https://www.thingiverse.com/thing:4974622
Cheers,
x0veN
I started down the Van's RV-10 build (shop setup, tools, and practice kits so far) and I'm about to order my empennage. While I was doing the Van's practice kits I was searching for 3D printed jigs and I could not find any. So I decided to make my own for the trailing edge drill guide and the trailing edge wedge countersink. Here it is for the taking, enjoy and I hope it helps someone like it has helped me.
https://www.thingiverse.com/thing:4974622
Cheers,
x0veN
Attachments
Last edited: