Setting the alignment for landing lights

[wsquare]

Looking for some guidance on setting the alignment for wing tip landing lights in a 9a. I installed the single FlyLed lights in the wing tips, and want to adjust them properly. Is there any guidance on how to aim the lights. Perhaps something along the lines of: "Set airplane on level surface XX feet from a vertical surface (like a hangar wall). Turn on lights and set center of beam for landing light XX feet up from ground, and XX feet off center line of airplane. Set center of beam for taxi light XX feet up from ground, and XX feet off center line of airplane." I did some searching, and could not find any guidance.

Thanks,
Wayne
RV-9a. N1179J. Purchased flying.
Made 2019 contribution.