Page 13-05, Step 3, Figure 2 Nutplates

[md9680]

Would someone please tell me the screw part number for the K1000-3 FUEL TANK ATTACH NUTPLATES? I have not been able to discover where in the plans they're finally used.

Thanks.

 

[TASEsq]

The inboard fuel tank attach “zee” has the bolts on the forward side and the nutplates on the spar. (Backwards to all the others).

Ref 18-09, Figure 1.

FYI - nutplates are tricky! They are part numbered as K-1000 but -3 and -03 are different! Without the zero they are for bolts. So a K1000-3 is for a an3 bolt, but a k1000-06 is for a -6 screw.

 

[scsmith]

Or, as they are properly called, "platenuts"

 

[md9680]

The inboard fuel tank attach “zee” has the bolts on the forward side and the nutplates on the spar. (Backwards to all the others).

Ref 18-09, Figure 1.

FYI - nutplates are tricky! They are part numbered as K-1000 but -3 and -03 are different! Without the zero they are for bolts. So a K1000-3 is for a an3 bolt, but a k1000-06 is for a -6 screw.

Thanks so much, for the figure reference as well as the education regarding screws versus bolts. Just what I needed!

 

[TASEsq]

Or, as they are properly called, "platenuts"

They are best ordered using your cellphone, while sitting on the hood of your car eating a TOMAYTO sandwich?

 

[mc607]

Or, as they are properly called, "platenuts"

Plate nuts


Nut plates