Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
Glareshield top garmin autopilot enclosure
- Thread starter 194WE
- Start date
Ed_Wischmeyer
Well Known Member
You know this already, just make sure it doesn't interfere with your forward vision.
Ed
Ed
Dad's RV-10
Well Known Member
Pics from this morning. N617AR RV-6.
Here are those pics you requested, sir. Tony Kirk did a 3D print of a housing that I almost put in (it was amazing seeing what Tony came up with just goofing around with his computer). Around that time my friend/mechanic Randy Richmond threw this together in about 30 minutes with some scrap aluminum. Rattle can black and done.
You can click on the pics for versions that are around 4,000 pixels wide. Turned out pretty much like how it is in the sim/jet (pic).
From outside the plexiglass:
Again, from outside:
From inside. The top lip is a little high, but your eyes are below it, honestly, so I really haven’t cared a bit.
Kindest,
Doug
Here are those pics you requested, sir. Tony Kirk did a 3D print of a housing that I almost put in (it was amazing seeing what Tony came up with just goofing around with his computer). Around that time my friend/mechanic Randy Richmond threw this together in about 30 minutes with some scrap aluminum. Rattle can black and done.
You can click on the pics for versions that are around 4,000 pixels wide. Turned out pretty much like how it is in the sim/jet (pic).
From outside the plexiglass:
Again, from outside:
From inside. The top lip is a little high, but your eyes are below it, honestly, so I really haven’t cared a bit.
Kindest,
Doug
Last edited:
