LettersFromFlyoverCountry
Well Known Member
I assume the remediation is filing skin although maybe I could abandon the two positioning holes, trim the area around the VS spar deeper, then pull the fairing forward
Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
Emp fairing vs stabilator
- Thread starter LettersFromFlyoverCountry
- Start date
I assume the remediation is filing skin although maybe I could abandon the two positioning holes, trim the area around the VS spar deeper, then pull the fairing forward
Here's a photo of mine showing width of the horiz. stab. skin there -- gives an idea of how much should be left (stab. is UP so clearance is at minimum). I'm guessing trim the skin, rather than the stinger fiberglass.
Attachments
