Lots of different ideas on jacking RV’s in the hangar, just another idea/version.
There’s several different versions of these in different heights, I chose these due to the bolted configuration having free shipping.
https://www.scaffoldmart.com/motorboat-stand-24-35-
I’ve borrowed an airport neighbors hydraulic jacks but they never offered enough articulation and always seemed slightly tippy, and they always leaked down.
These boat stands underneath the center section are very solid and require no fabrication, even rocking the wings side to side it’s solid. They’ll also work under the wing tiedown point as well with or without a bolt. They are more work to place and will require a small cheater pipe to screw the airplane up but it will stay level forever.
There’s several different versions of these in different heights, I chose these due to the bolted configuration having free shipping.
https://www.scaffoldmart.com/motorboat-stand-24-35-
I’ve borrowed an airport neighbors hydraulic jacks but they never offered enough articulation and always seemed slightly tippy, and they always leaked down.
These boat stands underneath the center section are very solid and require no fabrication, even rocking the wings side to side it’s solid. They’ll also work under the wing tiedown point as well with or without a bolt. They are more work to place and will require a small cheater pipe to screw the airplane up but it will stay level forever.