Air Gizmos angle adapter

[jwall]

having a problem installing the Air Gizmos angle adapter, model 696. When the panel dock is installed onto the angle adapter, the four screws that go into the back to secure all to the radio stack are impossible to put in. Any help would be greatly appreciated. JW RV6A

 

[Fhuber]

You could install some rivet nuts to screw into. Maybe you can borrow the tool you need for the install.
https://www.aircraftspruce.com/catalog/hapages/rivetnuts.php

 

[jwall]

Thanks for the reply. My problem is getting a screw driver in that small of an area. Rive nuts would be O.K., but getting a screw into the sides is the problem. have looked many different small ratcheting screw drivers, no luck. Thanks again. JW