[aturner]

Replacing my ignition harness - installing the Series 200 Emags. One of my baffling pass-throughs is cracked and broken. Anyone know where I can get a replacement? Or have an idea for a creative work-around? Thanks.

 

[PaulvS]

Replacing my ignition harness - installing the Series 200 Emags. One of my baffling pass-throughs is cracked and broken. Anyone know where I can get a replacement? Or have an idea for a creative work-around? Thanks.


View attachment 62894

Aircraft Spruce, for $11.70:

Engine Baffle Ignition Wire Seal 5MM Three Wire | Aircraft Spruce

Engine Baffle Ignition Wire Seal 5MM Three Wire Engine baffle ignition wire seal. 5MM, three wire hole. #375

www.aircraftspruce.com

 

[Scott Hersha]

Got mine from Steve Melton. rvplasticparts.com.

Spark Plug Lead Baffle Seal | rvplasticparts

Version 2 has tighter tolerances that make a tigher seal than any other available part on the market. A part to pass spark plug leads through the baffle. Sized for standard 7MM Slick outside diameter leads (typical Slick red silicon leads). Similar hole spacing to Sick baffle seal except...

www.rvplasticparts.com

work fine, last a long time.….

 

[dmattmul]

Check plug wire size, most automobile plug wire (used in E Mag) is 8 to 8.5 mm.

 

[aturner]

Thank-you, somehow I didn't find that the first time I looked at the ACS website.

Aircraft Spruce, for $11.70:

Engine Baffle Ignition Wire Seal 5MM Three Wire | Aircraft Spruce

Engine Baffle Ignition Wire Seal 5MM Three Wire Engine baffle ignition wire seal. 5MM, three wire hole. #375

www.aircraftspruce.com