dmattmul
Well Known Member
Doubtful
I used 65-foot lbs. and easily removed the nuts several times. My guess is 100's have also used the same torque specs. Most OEMs allow for plenty of safety margins to their specs. You need to have a properly calibrated torque wrench and allow for the added length of the shorter prop wrench used. It's good you got your prop back on. Where did 47 come from?
I used 65-foot lbs. and easily removed the nuts several times. My guess is 100's have also used the same torque specs. Most OEMs allow for plenty of safety margins to their specs. You need to have a properly calibrated torque wrench and allow for the added length of the shorter prop wrench used. It's good you got your prop back on. Where did 47 come from?