After setting up my prop and governor, I'm not getting full travel on the governor with the stock cable. The result is that the prop won't cycle on the ground below 1900 RPMs, and even then I only get a 150 RPM drop.
I've still got about 30% of the travel available on the low side of the governor arm. Jirostroj gov.
Anyone ever use a longer prop lever arm?
No verniers, I know some do this but I don't like them.
I've still got about 30% of the travel available on the low side of the governor arm. Jirostroj gov.
Anyone ever use a longer prop lever arm?
No verniers, I know some do this but I don't like them.