A Allan Moore I'm New Here Jun 22, 2023 #1 It's rediculous how difficult it is to find a part number for a simple seal. I have a O-360-A1A with a Hartzell HC-C2YK-1BF prop. I need to change my alternator belt and need a new seal.
It's rediculous how difficult it is to find a part number for a simple seal. I have a O-360-A1A with a Hartzell HC-C2YK-1BF prop. I need to change my alternator belt and need a new seal.
Mike S Senior Curmudgeon Jun 22, 2023 #2 Pretty sure it is an "O" ring. Most likely a call to a prop shop will get you the info.
hgerhardt Well Known Member Jun 22, 2023 #3 https://www.aircraftspruce.com/catalog/pnpages/05-11998.php It's a -228 size O-ring.
Larco Well Known Member Jun 22, 2023 #4 Google is your friend. Google" hartzell prop oring " and it will give some choices of vendors.
bjdecker Well Known Member Ambassador Jun 22, 2023 #5 See https://hartzellprop.com/MANUALS/115N-0000-A.pdf Figure out the type of Hub/Flange you have -- Table 2-1 Then reference Table 3-1 for the O-Ring required. -228 , unless you have an N flange hub. See McMaster-Carr, Part number 1288N188 for the Viton -228 O-Ring. (https://www.mcmaster.com/products/o...uper-resilient-viton-fluoroelastomer-o-rings/) Cheers, B
See https://hartzellprop.com/MANUALS/115N-0000-A.pdf Figure out the type of Hub/Flange you have -- Table 2-1 Then reference Table 3-1 for the O-Ring required. -228 , unless you have an N flange hub. See McMaster-Carr, Part number 1288N188 for the Viton -228 O-Ring. (https://www.mcmaster.com/products/o...uper-resilient-viton-fluoroelastomer-o-rings/) Cheers, B
A Allan Moore I'm New Here Jun 22, 2023 #6 bjdecker said: See https://hartzellprop.com/MANUALS/115N-0000-A.pdf Figure out the type of Hub/Flange you have -- Table 2-1 Then reference Table 3-1 for the O-Ring required. -228 , unless you have an N flange hub. See McMaster-Carr, Part number 1288N188 for the Viton -228 O-Ring. (https://www.mcmaster.com/products/o...uper-resilient-viton-fluoroelastomer-o-rings/) Cheers, B Click to expand... Thanks for the info. I have the K flange so its the -228. I had it in my shopping cart at Spruce but just wasn't 100% sure. Regards, Allan
bjdecker said: See https://hartzellprop.com/MANUALS/115N-0000-A.pdf Figure out the type of Hub/Flange you have -- Table 2-1 Then reference Table 3-1 for the O-Ring required. -228 , unless you have an N flange hub. See McMaster-Carr, Part number 1288N188 for the Viton -228 O-Ring. (https://www.mcmaster.com/products/o...uper-resilient-viton-fluoroelastomer-o-rings/) Cheers, B Click to expand... Thanks for the info. I have the K flange so its the -228. I had it in my shopping cart at Spruce but just wasn't 100% sure. Regards, Allan
