K

kgood

Well Known Member
Can anyone out there with an RV9 or RV9A with O-320 provide a measurement between the firewall and back of spinner? Working on a project and it would be helpful to me.
Thanks!

Kurt Goodfellow
RV9/WAM 120 diesel 650 hours
 
I have a note of 31.5 inches from the firewall to the aft side of the starter gear on an XIO-320. ~ hope it helps your project.
 
The cowl was off so I got a measurement to the back of the spinner. Somewhere between 34.5 inches (based on accurate measurements taken during construction) and 34.875 inches (directly measured with lots of obstructions and possible error).
 
You must log in or register to reply here.