What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

anti-servo tab indicator?

JerryG150

JerryG150

Well Known Member
On other LSAs I've flown there was a small light panel indicating the position of the servo-tab. Is there an indicator light system on the screen of the Dynon180 to indicate the position so it'll be in the correct position for takeoff etc??
 
Indeed there is a stab trim indicator...

889908548_dnEjX-M.jpg

The calibration procedure lets you set a take-off position which is indicated by the green line.

Tony
 
JerryG150 said:
On other LSAs I've flown there was a small light panel indicating the position of the servo-tab. Is there an indicator light system on the screen of the Dynon180 to indicate the position so it'll be in the correct position for takeoff etc??
Click to expand...

Jerry,

You have to run thru the calibration procedure in the Dynon manual before it will show up on the display.
 
AND REMEMBER........

When the tab is down, that's nose up pitch trim.

I know it sounds basic, but approximately 1/2 of the airplanes I inspect have the pitch trim backwards.
 
You must log in or register to reply here.
Back
Top