Good evening:
This is my third attempt at getting an adequate fit to the tail fairing. Each time I attempt to attach it the attachment is too far forward and I fear there is not enough fiberglass to keep it attached during flight.
My thought was to add an extension of 2x the distance of the attachment area, using he currently drilled holes with slightly larger rivets. This will put the attachment of the fairing further aft leaving a greater edge distance.
I have attached a few pictures, but can send any one the word doc with arrows and lines showing my thoughts.
Any advice greatly appreciated.
Thank you in advance
https://photos.google.com/album/AF1QipP47sp7Fhv-QACTnWBchP8wRzv69CfxMy63K2Tq
This is my third attempt at getting an adequate fit to the tail fairing. Each time I attempt to attach it the attachment is too far forward and I fear there is not enough fiberglass to keep it attached during flight.
My thought was to add an extension of 2x the distance of the attachment area, using he currently drilled holes with slightly larger rivets. This will put the attachment of the fairing further aft leaving a greater edge distance.
I have attached a few pictures, but can send any one the word doc with arrows and lines showing my thoughts.
Any advice greatly appreciated.
Thank you in advance
https://photos.google.com/album/AF1QipP47sp7Fhv-QACTnWBchP8wRzv69CfxMy63K2Tq