VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics



Go Back   VAF Forums > Model Specific > RV-7/7A
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-28-2005, 02:18 PM
DeltaRomeo's Avatar
DeltaRomeo DeltaRomeo is offline
Your host.
 
Join Date: Jan 2005
Location: Highland Village, TX
Posts: 3,493
Default Show us the status of your 7/7A project!

(Instructions on inserting images into messages can be found at http://www.vansairforce.net/article...rums/images.htm)

Best always,
__________________
Doug Reeves RV-6 / Contact
Reply With Quote
  #2  
Old 05-28-2005, 05:36 PM
mark manda's Avatar
mark manda mark manda is offline
 
Join Date: Feb 2005
Location: Riverside,Calyfornia
Posts: 884
Default 174mm reserved

getting ready for the big push. my own V day. hard to describe exactly where I'm at. all over.


sixty more ft of wire from ACS this morning should get the wiring done.


in need of TLC

www.pbase.com/mark2nite

Last edited by mark manda : 02-17-2006 at 12:32 AM.
Reply With Quote
  #3  
Old 05-28-2005, 09:45 PM
Jamie's Avatar
Jamie Jamie is offline
 
Join Date: Jan 2005
Location: Atlanta, GA
Posts: 2,281
Default



Empennage, Slow-Build Wings Done, Slow-Build Fuse is Flipped...Working on Fuse Innards.
__________________
"What kind of man would live where there is no daring? I don't believe in taking foolish chances but nothing can be accomplished without taking any chance at all." - Charles A. Lindbergh
Jamie | RV-7A First Flight: 7/27/2007 (Sold) | GnuPG/PGP Public Key

Last edited by Jamie : 08-15-2005 at 08:37 PM. Reason: Updating Status
Reply With Quote
  #4  
Old 05-30-2005, 09:43 AM
Scott Will's Avatar
Scott Will Scott Will is offline
 
Join Date: Jan 2005
Location: ATL
Posts: 734
Default

Starting on the canopy... gathering instruments & avionics, thinking about the engine...

__________________
Scott Will
http://will2fly.com
CFI - CFII - MEI
FLYING RV-7A IO-360 @ KPDK

Reply With Quote
  #5  
Old 05-30-2005, 06:44 PM
Captain_John's Avatar
Captain_John Captain_John is offline
 
Join Date: Jan 2005
Location: KPYM
Posts: 1,968
Default

Not much longer now! Maybe about another ten minutes! That's what I tell people who ask!

This week I am starting on the tanks! My ProSeal is on order along with my flop tube!



CJ
__________________
RV-7 Test Phase!
TMX-IO-360, G3i ignition & G3X with VP-X (Talk about alphabet soup!)
Everyday there is an airshow at Hangar #5 at KPYM!
Reply With Quote
  #6  
Old 05-30-2005, 09:31 PM
Mark Burns's Avatar
Mark Burns Mark Burns is offline
 
Join Date: Jan 2005
Location: Ruston, Louisiana
Posts: 787
Default This is where I'm at.



Slow build wings due in a few weeks.
__________________
Mark Burns
Ruston, Louisiana
RV-7A N781CM 1,085+
Bulldog Flight / KC Flight sometimes :-)
Reply With Quote
  #7  
Old 05-31-2005, 11:47 AM
Louavul's Avatar
Louavul Louavul is offline
 
Join Date: Jan 2005
Location: Belen, NM
Posts: 55
Default Status 70289

This was riveted together over the holiday weekend.

Next step, the center section.

Getting closer to seeing the light at the end of the tunnel.





Steven L. Hild
La Vernia, TX
RV-7 N590SC (res)
Reply With Quote
  #8  
Old 05-31-2005, 02:54 PM
Derrell Derrell is offline
 
Join Date: Jan 2005
Posts: 140
Default

Put together & take it apart. Here we have drilled the rear spar. At present, wingroot fairings & platenuts have been fitted. Wing tips have been adjusted
& Creative Air Nav lights & landing lights installed. Presently working on the instrument panel.

http://img204.echo.cx/img204/4327/pc2600038ln.jpg

Derrell Brooks
derrell@brandywineprinting.com
Reply With Quote
  #9  
Old 05-31-2005, 03:04 PM
SonoraMike SonoraMike is offline
 
Join Date: Mar 2005
Location: Sonora, CA
Posts: 27
Default

I'm here, they just arrived today




Reply With Quote
  #10  
Old 05-31-2005, 10:50 PM
kevinh's Avatar
kevinh kevinh is offline
 
Join Date: Jan 2005
Location: San Mateo, CA
Posts: 1,375
Default

My RV-7A is almost no longer a project, more like an airplane. I think about five weeks till first flight. The latest pictures are on my
build log , but here's one from when we attached the wings:

Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:22 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.