VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV General Discussion/News
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-18-2017, 01:45 PM
Ironflight's Avatar
Ironflight Ironflight is offline
VAF Moderator / Line Boy
 
Join Date: Jan 2005
Location: Dayton, NV
Posts: 11,179
Default I'll Never Need A Repairman's Certificate Again....

When I was a kid, infatuated with anything that flew (still am that kid) and reading every book I could get related to aviation, I came to the conclusion that to be a complete aviator, you needed to be able to fly, design, and work on airplanes. I don’t know why I figured it out that way – just did. So I became a pilot in High School, and went to college to learn to design airplanes. Checked off two of the three. I started working on airplanes when I was thirteen, and have been doing it ever since – but always on either experimental aircraft or under the supervision of a licensed mechanic (when working on certified aircraft). I never had the time to go to a two-year trade school to do the formal training for the A&P, and when I lived in Houston, the local FAA office made it pretty difficult to take the test based on just experience.

Fortunately, the Reno FAA guys have a more enlightened view of the world, and last fall an inspector offered to sign my paperwork to allow me to take the three written exams, the oral exam, and the practical. I finished the writtens in January, and have spent the last two weeks prepping for the O&P. And this morning, I became a licensed A&P! Took the test at Barnes Aviation at Fox Field in the Antelope valley, spitting distance from Edwards (and yes – it's THAT Barnes…..). It took a lot of time to study so that I’d do the tests to high standards, and I can’t thank Louise enough for her support in this endeavor. Now maybe, I can get on to all those other things on the list….

I had to do a riveting project for the Practical - the FAA called it a "complex riveting project". Consisted of riveting a two inch by 2 inch piece of .040 aluminum to the center of a four inch by four inch square of the same stuff, using eight rivets. Mind the edge distance! I was not worried.....
__________________
Paul F. Dye
Editor in Chief - KITPLANES Magazine
RV-8 - N188PD - "Valkyrie"
RV-6 (By Marriage) - N164MS - "Mikey"
RV-3B - N13PL - "Tsamsiyu"
A&P, EAA Tech Counselor/Flight Advisor
Dayton Valley Airpark (A34)
http://Ironflight.com

Last edited by Ironflight : 03-18-2017 at 04:08 PM.
Reply With Quote
  #2  
Old 03-18-2017, 01:48 PM
rv9builder rv9builder is offline
 
Join Date: Jan 2005
Location: Irvine, CA
Posts: 528
Default

Congratulations, Paul!
__________________
Mark
RV-12 Project: Working on Empennage
RV-9A Project: Sold

VAF donation made for 2017
Reply With Quote
  #3  
Old 03-18-2017, 01:48 PM
GaryK's Avatar
GaryK GaryK is offline
 
Join Date: Nov 2005
Location: Zeeland, Michigan
Posts: 297
Default

Congrats Paul
Well deserved!!

Gary
Reply With Quote
  #4  
Old 03-18-2017, 02:16 PM
JonJay's Avatar
JonJay JonJay is offline
 
Join Date: Jan 2007
Location: Battleground
Posts: 3,377
Default

Way to go! My mentor who was going to sign off on my hours passed away.
I then ran afoul of the "You can't count building an experimental..." guy at the FISDO when I went in to apply and frankly I just gave up rather than try to fight upstream. Thankfully I have several good friends and neighbors that will sign off on anything other than my 6 which I hold the certificate on.

Well deserved Paul.
__________________
Smart People do Stupid things all the time. I know, I've seen me do'em.

RV6 - Builder/Flying
Bucker Jungmann
Fiat G.46 -(restoration in progress, if I have enough life left in me)
RV1 - Proud Pilot.
Reply With Quote
  #5  
Old 03-18-2017, 02:17 PM
David-aviator's Avatar
David-aviator David-aviator is offline
 
Join Date: Feb 2005
Location: Chesterfield, Missouri
Posts: 4,286
Default

Congrats Paul, knew you could do it!!
__________________
David Domeier
RV-7A...Sold #70374
The RV-8...#83261 flying as of 6/16/2014
RV-3 ....fan

I'm in, dues paid 2017 This place is worth it!
Reply With Quote
  #6  
Old 03-18-2017, 02:17 PM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 2,565
Default Congratulations

Congratulations Paul. Sounds like a great story for Kitplanes.
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/01/2016. Plus a little extra.
RV-7A #73391, N511RV reserved (1,800+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote
  #7  
Old 03-18-2017, 03:14 PM
Mel's Avatar
Mel Mel is offline
 
Join Date: Mar 2005
Location: Dallas area
Posts: 9,440
Default Hey Guy......

Good going. I never doubted you! CONGRATULATIONS!!!!!!!
__________________
Mel Asberry..DAR since last century
A&P/EAA Tech Counselor/Flight Advisor
Specializing in Amateur-Built and Light-Sport Aircraft
<n168tx(at)flytx.net>
North Texas (8TA5)
RV-6 Flying since 1993
175hp O-320
3-Blade Catto (since 2003)
FRIEND of the RV-1
Eagle's Nest Mentor
Reply With Quote
  #8  
Old 03-18-2017, 03:24 PM
Vlad's Avatar
Vlad Vlad is offline
 
Join Date: Oct 2008
Location: NJ
Posts: 6,834
Default

Congratulations Paul! You reached the heights many of us only dreamed about.

__________________
Не имей сто рублей, а имей сто друзей.
Reply With Quote
  #9  
Old 03-18-2017, 03:27 PM
control control is offline
 
Join Date: Feb 2006
Location: Stockholm, Sweden
Posts: 244
Default

Congrats!!!
__________________
RV-14 kit #140138
working on the fuselage kit
wings, done, tail kit, almost done
Http://magnusrv.blogspot.se
Reply With Quote
  #10  
Old 03-18-2017, 03:50 PM
pa38112 pa38112 is offline
 
Join Date: Mar 2008
Location: Clarksboro, NJ
Posts: 370
Default

Congratulations!
__________________
http://aprs.fi/N153MC
2004 RV6A Flying
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:23 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.