VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 09-23-2019, 04:23 AM
amekler amekler is offline
 
Join Date: Aug 2009
Location: Gilford,NH
Posts: 82
Default measuring axle alignment

i just mounted my landing gear and are a little unclear on how to check on axle alignment . i put a block of wood on each axle and ran a string between them.
Alan
RV12 120250
Reply With Quote
  #2  
Old 09-23-2019, 06:31 AM
Tom023 Tom023 is offline
 
Join Date: Jul 2011
Location: Cypress, TX
Posts: 331
Default

Alan,

I’m not sure if the 12is exactly the same as the 14 but sounds like it might be. There is a good explanation in the 14 plans on how to determine toe in/ out using the wood blocks and string. If the 12 plans lack this detail take a look at the 14 landing gear chapter. Essentially you measure the gap between the string and block and from this calculate the angle.

Section 40A page 40A-08
__________________
RV14A #140083
Flying! 8/12/19
2019 Donation

Last edited by Tom023 : 09-23-2019 at 06:39 AM.
Reply With Quote
  #3  
Old 09-28-2019, 04:23 PM
amekler amekler is offline
 
Join Date: Aug 2009
Location: Gilford,NH
Posts: 82
Smile

once i figured out how to do it currently everything was fine!
Alan
Reply With Quote
  #4  
Old 09-28-2019, 04:31 PM
snopercod's Avatar
snopercod snopercod is offline
 
Join Date: Aug 2016
Location: Asheville, NC
Posts: 2,001
Default

Those cheap laser levels that shoot a beam of red light are handy, too. You can drop a plumb bob from...say...the tail and project a red laser line on the floor to measure the alignment of the axles or wheels.
__________________
(2020 dues paid)
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:43 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.