Bellcrank ribs to 1407 bulkhead

There is never any reference for riveting the 1429 bell crank ribs to the 1407 bulkhead. They are joined on the bottom skin on page 10-13. Would this be the best time to rivet these two together. Looking ahead it looks like they missed a similar thing on page 10-32 with regard to the 14131 upper aft fuse rib to 1407 bulkhead connection.

Okay to rivet per Scott at Vans. Same with top rib stiffener to 1407 bulkhead point.

Edit: Also should have visited the common errors spreadsheet. Ron was already nice enough to include this.