Garmin GTN650 Configuration with G3X

Can somebody help with the correct ARINC and RS-232 configuration settings for working with the G3X system. A lot more options that was available with the GTN430. Appreciate it. Contact [email protected]

Thanks

ten4teg said:

Can somebody help with the correct ARINC and RS-232 configuration settings for working with the G3X system. A lot more options that was available with the GTN430. Appreciate it. Contact [email protected]

Thanks

Click to expand...

Hello Tom,

See page 27-38 of the Rev. AL G3X/G3X Touch installation manual.

If you still have questions, please contact us at [email protected].

Thanks,
Steve

Not to answer your question directly, but when we installed our G3X Touch system, I made an interconnect diagram -- Serial Port Out n on Device A goes into Serial Port m on Device B, etc. That's so much more useful than Pin 45 on connector XYZ goes to pin 937 on connector ABC. I'm a little surprised that the documentation does not suggest capturing that data -- unless it's been added recently.

I also recorded all of the serial port settings on each device, etc. This document has been extremely handy over the years as new devices were added. PM me your email and I'll send you a copy.

Ed