VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 01-11-2018, 11:55 AM
sglynn's Avatar
sglynn sglynn is offline
 
Join Date: Mar 2008
Location: Anacortes, WA
Posts: 639
Default Panel wire routing Quick Panel

Are you routing wires THRU or UNDER the subpanel?

I'm installing a Dynon/Advanced Quick Panel (which is great) but wondering how and where to route wires from the firewall back to the panel. Are you routing thru the area and drilling holes thru the subpanel to access the area directly behind the panel? Or are you inclined to route wires along the bottom of the ribs and under the subpanel?

I'm thinking about future maintenance. That area directly behind the firewall will be difficult to get to.

Any reasoning for where you are routing would be most appreciated.
Photos of your routing are gold. Please share 'em.
__________________
Steve Lynn
RV-7A
95% Complete
Ready for first start
Anacortes, WA
www.mykitlog.com/sglynn
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:43 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.