What is F-C0011

What page and step is the F-C0011 used.

It is a conversion template used when converting an earlier vintage fuselage kit (one meant for a Dynon D-180 EFIS) to a later version designed for installation of a Skyview EFIS.
There is a special plans section (don't remember the # right now) that provides instruction for the use of this template for locating new mounting holes at different location on the fuselage, for installation of the Skyview equipment.

Found it.
Section 42D

That is a template used for drilling holes. Some of those holes are in the base of the avionics bay. For example, those closely spaced holes making a square are for the USB connector that points down towards your legs.

I forget where all the other holes are located but this isn't a part that actually gets "installed."

Cool, Thanks. I was worried my wife was right and I was going to have extra part leftover.