Shockwave
Well Known Member
Hello friends. I'm wanting to (safely and within code) run an air compressor line from my basement workshop out to the garage so I can have air as I begin working on the wings. The garage is a less than ideal place for my compressor, as it's 220v and I have a single 110v outlet that is also on the circuit with the lights and garage door opener. The wings are too big to build in the basement short of demolishing some portion of the house to get them out, which I'm trying to avoid doing.
Worse case I could drag out a long hose and run it up the steps leaving the door open, but is there a more elegant solution I can put in?
Worse case I could drag out a long hose and run it up the steps leaving the door open, but is there a more elegant solution I can put in?