I recently purchased a flying 6A with a decent steam gauge VFR panel, including an S-TEC-50 autopilot, Apollo GX65 GPS (database hasn't been updated since 2010 and Garmin is discontinuing support in June), GTX320 Transponder, and PM 1000II intercom. I also have a Stratus 2 and Foreflight Pro Plus on mini iPad which gives me ADS-B in for now. I knew going in I'd want to be doing some upgrades, including upgrade to IFR and glass. But I'm struggling with information overload in trying to figure out where to start and how much to bite off in one chunk. Highest priority is getting ADS-B out capability. But I don't want to invest a big chunk into something that gets me ADS-B out today, but then becomes redundant with additional panel upgrades I make in a few months. Or is the best solution to just go whole hog with everything I need to do at one time? I realize that there will be a variety of opinions, but looking for some starting direction thoughts. VAF has already been a hugely valuable resource for this RV newcomer.