Installing Wings w/ Fuse on Dolly
I would like to get my wings painted and out of the garage. However, I need to fit them first before painting to get all of the nutplates on for the gap covers. I am not ready to put the fuse on the gear yet and was wondering if anyone has put the wings on with the fuse on a dolly. I did this on my 6, but those wings were much lighther. It would seem that as long as I have good support under the spar carry through I should have no issues. My current dolly supports under the web in front of the spar, so would have to fabricate a new brace or move the fuse forward a foot.
Curious what others have done.
RV-6A / IO-320, Flying as of 8/2015
RV-10 in progress