StressedOut
Well Known Member
The six HS-1004 ribs all have holes oriented vertically in the middle of the rib. However, it looks like only the two inboard ribs (L/R) use them to attach to the HS-00916 stringer web. See page 08-01.
I want to confirm these holes are not used for anything else later in the plans. I've looked forward to Section 11 (Empennage Attach) and see nothing there.
It's generally a good practice to fill open holes with a rivet for fatigue reasons. I want to fill those holes, but need some confirmation they aren't otherwise used.
I want to confirm these holes are not used for anything else later in the plans. I've looked forward to Section 11 (Empennage Attach) and see nothing there.
It's generally a good practice to fill open holes with a rivet for fatigue reasons. I want to fill those holes, but need some confirmation they aren't otherwise used.