Sanding F-1095A for clearance?

O

oren_rokach

Well Known Member

• Dec 4, 2019

• #1

Hi Guys
is this normal? the clearance issue? i have to sand the bracket so the bellcrank wont touch

https://photos.app.goo.gl/682eFtKDZqEgVxKB9


Thanks!
Oren

 

Last edited: Dec 4, 2019

R

RandyAB

Well Known Member

• Dec 4, 2019

• #2

Is that the trim setup?

 

J

jwellman

Member

• Dec 4, 2019

• #3

It looks like you're missing some washers. Should have 2 AN960-10 washers between the crank and the eyelet and one between the eyelet and the bolt. Just like the other eyelet. Also it should be a locknut on the eyelet.

Jared

 

Last edited: Dec 4, 2019

J

jwellman

Member

• Dec 4, 2019

• #4

Not sure why the image isn't coming through.

https://photos.app.goo.gl/oDqFMWbo5MAjcCmh9

Jared

 

O

oren_rokach

Well Known Member

• Dec 5, 2019

• #5

oren_rokach said:

Hi Guys
is this normal? the clearance issue? i have to sand the bracket so the bellcrank wont touch

https://photos.app.goo.gl/682eFtKDZqEgVxKB9


Thanks!
Oren

Click to expand...

RandyAB said:

Is that the trim setup?

Click to expand...

Yes
sorry
i added a movie as well.
and the washers are missing of course, since i am assembling/Dissasembling many times, so to save time

- Oren